Submatix Rebreathers - Product Accessories :: www.submatix.org :: UK Website

The new Oxyscan 100 Pro is a PPO2 monitor to check the partial pressure of oxygen in the breathing loop. The display shows the actual partial pressures of oxygen being breathed. The user can change the sensor and battery by herself/himself. However the new Pro A Series with alarms must be sent back to a Submatix service centre for battery replacement. The OXYSCAN 100 PRO can be used as an oxygen analyser using a special adapter (see picture) as well as a PPO2 monitor in your rebreather. It is water activated and is an excellent, low cost PPO2 monitor for use in SCR rebreathers.

Interface for the Uwatec Oxy2
The newly developed interface for the UWATEC Oxy 2 sensor head allows neat installation of the Oxy 2 into the case of the SUBMATIX SCR 100 ST. The sensor can be connected to a Dräger P-con in the breathing bag. The sensor output is transferred by cable to the Oxy2.
The installation is very simple and can be made without any changes of the UWATEC Oxy 2.

Installation-kit for the Uwatec Oxy" in the inhale hose
The adapter set (2 connectors) was developed for use with the UWATEC Oxy 2. By using the adapter the UWATEC Oxy 2 can be installed into the inhale hose of the SUBMATIX Rebreather.

SUBMATIX Weight Harness and life-saving collar

The SUBMATIX Weight Harness and life-saving collar was developed to guarantees the diver an optimal position of the diving gear. The Weight Harness has a lead bag with lead drop. The life-saving collar has a buoyancy volume of 17 litres and is worn at the front side of the human body.

SUBMATIX bailout cylinder

The cylinders are available in 1 and 2ltr. The tank neck thread is a cylindrical thread (M 18 x 2.5) but a DIN convertor allows connection to any DIN 1 st stage.

SUBMATIX bailout cylinder bag
- to install a bailout cylinder or an additional gas cylinder to the SUBMATIX harness
- available for the tank volumes of 1 to 2ltr
- suitable for fitting suit inflation systems or torch battery cansisters

(without tank, pressure reducers and middle pressure hoses)

The Submatix labels are made of high-quality waterproof vinyl.

The following labels are available:

• Cylinder label Nitrox
• Cylinder label Oxygen
• Cylinder label Diluent
• Cylinder label Bottom-Mix
• Cylinder label Main-Mix
• label for the scrubber canister
• label SCRUBBER TANK FILLING LIMIT
• SUBMATIX Label

Angles & Adapters

1)Adapter: female thread ¾” to female thread G 5/8”

2)Adapter: trible distributor (1 x male thread 3/8” UNF to 3 x female thread 3/8” UNF) – low pressure

3)Angle: male thread 3/8” UNF to female thread 3/8” UNF – low pressure

4)Angle: male thread 7/16” UNF to female thread 7/16” UNF – high pressure

5)Adapter: male thread 3/8” UNF to male thread for retaining nut low pressure hose

6)Adapter: male thread 1/8” UNF to male thread for retaining nut low pressure hose

7)Adapter: male thread 3/8” UNF to female thread 1/8” (without illustration)

Submatix Weights

The weights will be installed in the GRP case at factory if specified when ordering a new unit (sizes available: 2 x 2 kg and 2 x 3 kg). The weights help the buoyancy of the unit and trim it to a comfortable swimming position in the water. The shape of the weights is designed to the profile of the case (saving space). All units can be retrofitted with these weights if required.