| |
|
| Real Time PPO2 Monitoring with the OxyScan Pro A Series |
 |
|
Safe rebreather diving relies on knowing what you are breathing. With Manual Closed Circuit Rebreathers this essential information is achieved using a minimum of two PPO2 monitors placed in the inhale side of the breathing loop. The O2 cells read the PPO2 of the gas in the bag and displays a clear reading on a digital display. The display prompts the diver to inject Oxygen as required to maintain a steady PPO2 in the breathing loop.
The new Oxyscan Pro A series offers the diver a multitude of options for PPO2 monitoring. All Oxyscan Pro A series PPO2 monitors feature self calibration, battery level checks and voltage output on the O2 cells. They also feature high and low PPO2 setpoint alarms and have been designed to seamlessly integrate into the forthcoming Submatix Electronic Control module.
The O2 cells are housed in a Submatix Patented cell holder or they can be specified in an industry standard holder so will fit all other makes of rebreather.
The Oxyscan Pro Con O2 cell holder can hold up to two O2 cells connected to a Fischer connector making removal between dives simple and connection to off board deco computers such as the VR3 possible.
• 12mths life span on O2 cell (dependent on usage)
• 2000 hrs battery life
• Impervious to HF interference
• Auto calibrated
• Auto Battery Check
• Auto cell voltage check
• High and low PPO2 setpoint audio / visual alarms
• Available in right hand, left hand or centre cable output
• Wrist mounted
|
| |
|
|
